Tuesday, April 24, 2012

Zoom H4n Handy Portable Digital Recorder

Zoom H4n Handy Portable Digital Recorder
Brand : Zoom | Rate : | Price : $291.99
Post Date : Apr 24, 2012 09:16:09 | Usually ships in 24 hours

Zoom H4n Handy Portable Digital Recorder

Zoom H4n is the most sophisticated portable handheld recorder with new features and improved user experience at every level. Among its many new features, Zoom’s H4n offers superior, built-in X/Y stereo condenser mics that allow variable recording patterns at either 90° or 120°. Higher quality audio capture through its new, digitally controlled, high-quality mic preamp, the ability to use internal and external mics simultaneously for 4 channel recording, a large LCD screen,more intuitive interface and onboard reference speaker will take the user’s recording experience to the next level. The H4n’s onboard X/Y stereo condenser mics are arranged with the right and left mics on the same axis. This design ensures that the mics are always equidistant from the sound source for perfect localization with no phase shifting. Frequency response remains uniform throughout your recording. The result is great stereo recording with natural depth and accurate imaging every time. The mics also adjust for variable recording patterns at either 90° or 120°. Our unique design lets you rotate each mic capsule from 90° (standard) to 120° (wide-angle) stereo for the ultimate versatility in any recording situation. Everyone knows that proper miking is essential to making a great recording. The H4n is the only handheld recorder that allows you to record on four channels simultaneously by using its onboard mics with either external mics or direct inputs. You can then use its built-in mixer to blend the channels for perfectly balanced recordings. Now your recordings can be richer than ever before. Or, to get a great recording of a live performance, use the H4n’s onboard mics to get a room mix while simultaneously recording a stereo mix from the mixing board for a live recording that is easily one of the best you’ve ever heard.

  • Built-in X/Y stereo mics record at either 90° or 120°
  • Four channel simultaneous recording using built-in and external mics
  • Digitally controlled, high-quality mic preamp for improved audio quality
  • Large 1.9-Inch LCD screen and improved user interface for easy operation
  • 24bit/96kHz Linear PCM recording for pristine recording

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Shop Dremel Multimax Tool A Little Fate... Save You Money Discounted Chevron Special Edition Hope 2002 Breast Cancer Awareness Car...

Wednesday, April 11, 2012

Apogee JAM Studio Quality Guitar Input for iPad, iPhone and Mac

Apogee JAM Studio Quality Guitar Input for iPad, iPhone and Mac
Brand : Apogee | Rate : | Price : $99.00
Post Date : Apr 11, 2012 20:42:08 | Usually ships in 24 hours

Apogee JAM Studio Quality Guitar Input for iPad, iPhone and Mac

JAM brings the legendary sound quality of Apogee to iPadTM, iPhone® and Mac. Now guitarists can have a pocket-sized, plug in and play interface at an unprecedented price and experience ultimate tone with the guitar amps and effects in Apple's GarageBand software or other compatible applications. Pristine digital sound for ultimate guitar tone JAM is a premium digital converter featuring PureDIGITAL technology which delivers your guitar's true tone to your iPad or Mac without compromise. JAM is the first high quality interface that makes a digital connection to both iOS devices and Mac. You will notice the sonic difference between JAM and other similar products immediately.

  • Multicolor LED for status indication and input level monitoring
  • Works with iPad, iPhone 4 and Mac

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Prices Metal Roofs Snow Costa Rica In Pictures (visual Geography. Second Series)... Fast

Sunday, April 1, 2012

Blue Microphones Yeti Pro USB Condenser Microphone, Multipattern.

Blue Microphones Yeti Pro USB Condenser Microphone, Multipattern.

Blue Microphones Yeti Pro USB Condenser Microphone, Multipattern.
Blue Microphones Yeti Pro USB Condenser Microphone, Multipattern.

Rate : | Price : $249.00 | Post Date : Apr 01, 2012 19:21:16
Usually ships in 24 hours

The Yeti Pro is the world’s first USB microphone combining 24 bit/192 kHz digital recording resolution with analog XLR output.Featuring three custom condenser capsules and four different pattern settings, the Yeti Pro can capture digital audio with up to fourtimes the clarity found on CDs. Plus, the Yeti Pro features a cutting-edge A-D converter chip and separate analog circuit path for usewith professional studio mixers and preamps. You also get a built-in headphone amplifier for zero-latency monitoring, and direct controlsfor headphone volume, pattern selection, mute, and microphone gain. So whether you record at home, in a studio (or in the Himalayas!),the Yeti Pro is your ultimate sound solution.

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Keurig Coffee B40 Guide Germs Toothbrush Order

Tuesday, February 28, 2012

Fender Mustang I Electric Guitar Amplifier

!±8± Fender Mustang I Electric Guitar Amplifier


Rate : | Price : Too low to display | Post Date : Feb 28, 2012 21:32:04
Usually ships in 24 hours

Mustang I is a 20-watt closed-back combo with an 8” Special Design speaker that sounds great and pumps serious volume. It contains 24 highly accurate on-board amp presets with tones from vintage Fender sparkle to outrageous modern metal distortion, and a bank of 24 built-in effects including chorus, flanging, phasing, tremolo, vibratone, step filter, reverb, echo, octaver and more — 12 modulation effects and 12 delay and reverb effects in all. It’s great for practice and jam sessions, and an 1/8” headphone jack lets you play loud, even if only for yourself. Further, connect Mustang I to your computer with free Fender FUSE software. Open up a world of possibilities, including on-screen parameter control, deep editing, additional effects, unlimited preset storage, online preset swapping with the Fender FUSE community, and free Fender artist presets. An optional single-button footswitch controls two quick-access presets.

HIGH-SPEED

Mustang™ I and II contain 24 highly accurate on-board amp presets with tones from vintage Fender® sparkle to outrageous modern metal distortion. Arranged in three banks of 8, all 24 amp presets are easily and instantly accessed right out of the box with only a twist of a single knob. Plug in and you’re up and running.

AMPED-UP

Shape your tone with a huge bank of 24 built-in effects including chorus, flanging, phasing, tremolo, vibratone, step filter, reverb, echo, octaver and more — 12 modulation effects and 12 delay and reverb effects in all. Mustang™ amps pack it all into a striking visual design. Sleek and modern Fender® styling provides a look that’s as desirable as the sound.

Fender Mustang I Amp
LOUD

Mustang I and II sound great at any volume, and although they’re the smallest members of the family, their closed-back cabinets and Fender Special Design speakers pump serious volume. The 20-watt Mustang I and the 40-watt Mustang II are great for practice and jam sessions. An 1/8” headphone jack lets you play loud, even if only for yourself.

USB CONNECTIVITY

Connect Mustang to your computer with free Fender® FUSE™ software. Open up a world of possibilities, including on-screen parameter control, deep editing, additional effects, unlimited preset storage, online preset swapping with the Fender® FUSE™ community, and free Fender artist presets.

Control Panel

Mustang runs from a very simple control interface, which includes gain, volume, treble, bass, master, preset select, modulation select, delay/reverb select, save button, exit button, tap tempo button — all easily navigated.

Amp Modeling

Mustang™ I and II contain 24 highly accurate onboard amp models with tones from vintage Fender® sparkle to outrageous modern metal distortion. Easily connect to your computer to add to the number of amp models, too.

Mustang™ I and II give you 24 individual amp presets arranged in three banks of 8 (i.e., three ’57 Deluxe™ presets, three Brit ’60s presets, etc.). These presets are easily and instantly dialed up using the “preset” knob (or from your footswitch or computer). Turn this knob to scroll through each of the three preset banks, which are indicated on the control panel by LED columns colored amber, green and red.

The red and green banks are for creating your own presets; the amber bank can only be modified using Fender® FUSE™ software.

MUSTANG I  amplifier modeling preset controls
Modulation Effects

Mustang further sculpts your sound with 12 sweeping, swooping and shimmering adjustable modulation effects, including chorus, phaser, flanger, vibratone, tremolo, step filter and octaver. Use your computer to add more effects, too.

MUSTANG™ I & MUSTANG™ II modulation effects control knob
Delay / Reverb Effects

Mustang makes the room resound with 12 easily adjustable delay and reverb effects ranging from subtle to cavernous, including tape delay, stereo/mono delay and room/plate/hall reverb.

Mustang I and II each have 24 effects controlled by two simple selection knobs on the control panel. The first knob (“MOD”) controls 12 modulation effects; the second (“DLY/REV”) controls 12 delay/reverb effect

MUSTANG™ I  Effect Level Controls

The MOD and DLY/REV knobs share the same three selection indicator LEDS. These LEDS are numbered 1, 2, and 3, and they correspond to the three positions within each of the selection ranges, labeled A, B, C and D on each knob (see the Mustang I/II manual for a table listing the effects selection for each knob). Use the LEDs to determine exactly which position the knob is pointing to (using the factory settings of the “MOD” knob, for example, position 1 in the A selection range gives you chorus, position 2 in the A selection range gives you deep chorus, and position 3 in the A selection range gives you flanging).

Adjusting the effects levels on Mustang I and II couldn’t be easier—simply hold down the “EXIT” button while turning the “MOD” or “DLY/REV” knobs. Doing this adjusts “how much” of a particular effect you’ll get, according to your personal preference.

USB Connection

Mustang includes USB connectivity for high-quality, low-latency audio output, and to engage the Fender® FUSE™ software application for PC and Mac. This opens up a world of possibilities, including on-screen parameter control, deep editing, unlimited preset storage, online preset swapping with the Fender® FUSE™ community, and free Fender artist presets.

Tuner

Onboard chromatic tuner puts intonation right on the money quickly and easily.

Onboard Chormatic Tuner

Sleek and modern Fender styling provides a look that’s as desirable as the sound. Mustang has Fender’s classic silver grille cloth, and is covered in tough, great-looking “carbon tweed” black textured vinyl.

Electronics
  • Voltage: 120V
  • Wattage: 20 Watts
  • Inputs: One
  • Auxiliary Input: 1/8” Stereo Input Jack
  • Headphone Jack: 1/8" Headphone Jack
  • Line Out: Speaker Emulated USB Output; 1/8” Headphone Jack Doubles as Speaker Emulated Line Out
  • Channels: One channel (with 24 presets)
  • Power Handling: 20 Watts
  • Controls: Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Select, Delay/Reverb Select, Save Button, Exit Button, Tap Tempo Button
  • Hardware
  • Front Panel: Black Front Panel
Hardware
  • Front Panel: Black Front Panel
  • Grill Cover Cloth: Carbon Tweed Textured Vinyl with Silver Grille Cloth
  • Output Impedance: 8 Ohms
  • Amplifier Length: 7.6" (19.3cm)
  • Amplifier Width: 15.5" (40 cm)
  • Amplifier Height: 14.5" (36.83 cm)
  • Amplifier Weight: 17 lbs (7.7 kg)
  • Speaker: 1-8" Fender® Special Design Speaker

Additional Comments:
24 effects in two categories, easily and instantly selected and adjusted with a twist of only two knobs. 12 modulation effects (chorus, deep chorus, flanger, bias/sine tremolo, optical/vintage tremolo, optical vintage tremolo fast, vibratone slow, vibratone fast, octaver, phaser slow deep, phaser medium, step filter), 12 delay and reverb effects (tape delay 150ms/1 repeat, stereo tape delay 300ms/3 repeats, mono delay 700ms/4 repeats, small room reverb, plate reverb, large hall reverb, Fender ’63 spring reverb, Fender ’65 spring reverb, tape delay room, tape delay large hall, ducking delay small hall, echo filter

Unique Features:
Amp modeling; distortion; 24 onboard presets (unlimited storage with computer); USB connectivity for user programming and audio recording output; auxiliary input for media player; chromatic tuner; Fender® FUSE™ application for deep editing, preset storage, patch swapping and free artist content; additional effects including fuzz, pitch shifter and touch wah, with even more available through Fender FUSE; Ableton® Live Lite 8 Fender Edition studio-quality recording software compatible with Mustang USB recording output; AmpliTube® Fender LE software

Buyers Canora Courier And Preeceville Progress...

Monday, January 2, 2012

Santa Cruz Well & Pump

www.dexknows.com Santa Cruz Well and Pump is the business to trust when you need help with your residential well drilling, pumps and energy resources. Since 1975, we've taken pride in our s

Ion Profile Lp Usb Turntable Buy Online

Thursday, December 29, 2011

Little Giant SUB12G05H2W2V Submersible Well Pump, 1/2-HP 12-GPM 2-Wire 230-Volt

!±8±Little Giant SUB12G05H2W2V Submersible Well Pump, 1/2-HP 12-GPM 2-Wire 230-Volt

Brand : Little Giant
Rate :
Price : $279.80
Post Date : Dec 29, 2011 14:38:38
Usually ships in 24 hours



4" submersible deep well pump. Ideal for use in 4" I.D. or larger wells from depths of 100 feet. Powered by 2-wire, Franklin Electric motor. Hex rubber bearing with extra large surface assures shaft stability and multiple flow channels keep small particles such as sand away from bearing surfaces. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without risk of corrosion.

Promotions Tabletop Grill

Sunday, December 25, 2011

Water Wells and Pumps

!±8± Water Wells and Pumps

Brand : | Rate : | Price :
Post Date : Dec 25, 2011 17:55:03 | N/A

Design and Build Safe, Efficient Systems

for Irrigation and Water Supply







Water Wells and Pumps is a comprehensive guide to the essential theory and design of ground water structures, wells/tube wells, and pumps, with particular emphasis on problem solving and meeting the requirements of developing nations. It features thorough, up-to-date knowledge of the science and technology of water wells and pumps as well as allied appliances and applications.



This authoritative desk reference outlines the construction, operation, and maintenance of water wells for irrigation and water supply. It also presents the development and testing of tube wells as well as a variety of pumps, both location-specific. Using SI units exclusively, Water Wells and Pumps features:





  • Coverage of a variety of pumps, including those using nonconventional, environmentally friendly means

  • Examinations of ground water recharge methods, well rehabilitation, and animal-powered water lifts

  • Techno-economic evaluation of projects on wells and pumps

  • References and problems at the end of each chapter for research and educational use




Solutions for all problems related to designing secure, reliable systems



• Ground water resources development and utilization • Hydraulics of wells • Open wells • Tube wells and their designs • Development and testing of tube wells • Rehabilitation of sick and failed tube wells • Man- and animal-powered water lifts and positive displacement pumps • Variable displacement pumps and accessories • Centrifugal pumps • Deep well turbine and submersible pumps • Propeller, mixed flow, and jet pumps • Applications of nonconventional energy sources in pumping

Usb Drum Kits Reviews Roc Face Creams Best Great Deals Photography Camera Filters

Monday, December 19, 2011

Used Submersible Well Pumps.mp4

submersiblewellpumps.org Used Submersible Well Pumps. Looking for a used Submersible Well Pumps online? There are many places to shop but come to my blog and I will show great deals on quality Submersible Well Pumps.

Bargain Sale Baby Trend Sit N Stand Plus Stroller Promotional Abs By Allen Schwartz Gowns

Friday, December 16, 2011

Putting bottomward a additional able-bodied point (shallow / alluvium well)

Just thought I'd do a little video of my husband's latest project, incase anyone else might be contemplating the same -- perhaps this will be helpful to them. Tim took pity on me having to literally spend hours hand-watering the garden, so he bought a little gas-powered water pump. BUT -- mechanically-challenged as I am, I wasn't really comfortable with not having the good, old-fashioned hand pump (that I knew I could operate LOL). So, he decided to drive a second point down and outfit that one with the new pump. You can never have too many wells in a crisis you know. Who knows -- I may have the neighborhood coming over at some point and filling water containers. . .

Prices Spiderman Dunks Fisher Price Dollhouse Furniture Order Now Discount Cuisinart Ss700

Monday, December 12, 2011

Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron

!±8± Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron


Rate : | Price : $122.00 | Post Date : Dec 12, 2011 22:45:32
Usually ships in 24 hours

The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It's made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.

Catalog Multimedia Projector Bose Cinemate Series Ii Home Theatre Speaker System Clearance Sale

Thursday, December 8, 2011

Pumps, Used in the Private House

!±8± Pumps, Used in the Private House

The main element of water supply system in the private house is for sure a pump. It should have enough performance not only to supply water to the house, but also it should be enough for watering the parcel, filling pools, etc. There are many varieties of pumps. If the depth of the water does not exceed 7 meters, the best choice would be the self-priming pump. Self-priming pump can be integrated with the ejector and without it.

The pump that is used together with membrane head tank is called the pumping station. Membrane tank is the hermetically sealed metal container which is divided into two parts by a membrane. Half of the tank is filled with air under pressure, and the second half used by a pump for pushing the water. Filling the tank is controlled by a special relay.

Self-priming pump with a membrane tank has the following advantages: the possibility of using water heating appliances; membrane tank could be installed in any convenient place, and in case of electricity switches off, water will not immediately disappear, because there are some reserve in tank; and finally the pump station is compact and has light weight.

If the water level is below 8 meters, the submersible pump for the well or bore can be the solution of the problem. It will cost you more compared with the pumping station. Well pump differs from the bore pump. It has a so-called "inner-jacket cooling of the engine", which increases its diameter, and therefore, well for this pump must also be large in diameter. Cooling the engine of bore pump is provided by lifted water.
If there is no electricity in your parcel, then, a hand pump can help you. Conventionally, these pumps can be divided into two types: the first - raise water from a depth not exceeding 7 meters, provide a continual rise of water up to 40 liters, and has weigh about 20 kilograms, while the second may raise water from wells with depth of 30 meters, usually have standpipes and have weigh about 25 kilograms.

Finally, we should definitely mention the trash pumps that are used for pumping water from basements and cellars after the spring snowmelt or after heavy summer rains. These domestic pumps are relatively inexpensive, consume little power, and can pump out up to 5 cubic meters of water per hour to a height of 4 meters. Sometimes trash pumps have to pump out water with the silt and mud, which can get into the basement with groundwater. Therefore, these pumps equipped with a special float.


Pumps, Used in the Private House

Purchasing Electric Pole Chainsaws Meco Smokers Free Shipping Flaky Puff Pastry Recipe Sale Off

Sunday, December 4, 2011

Wayne SWS50 1/2 HP 384 GPH Shallow Well Jet Pump, Cast Iron

!±8± Wayne SWS50 1/2 HP 384 GPH Shallow Well Jet Pump, Cast Iron

Brand : Wayne | Rate : | Price : $189.99
Post Date : Dec 04, 2011 16:48:31 | Usually ships in 24 hours


The Wayne 1/2 HP 384 GPH shallow well jet pump is designed for wells up to 25 feet deep, with jet pumps housed in rugged cast iron housing. The pump self-primes after its housing is filled with water, and it pumps out 385 gallons per hour at a five-foot lift, or 384 gallons per hour at a 25-foot lift. You can run the pump at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery. The square flange motor has thermal protection to prevent overheating, and Wayne backs its pump with a three-year limited warranty.

More Specification..!!

Shopping Caribou Sorel Women Promo Olympus Sp565uz

Thursday, December 1, 2011

SHURflo 2088-422-444 2.8 Classic Series Potable Water Pump

!±8± SHURflo 2088-422-444 2.8 Classic Series Potable Water Pump

Brand : SHURflo | Rate : | Price : $69.48
Post Date : Dec 01, 2011 06:08:37 | Usually ships in 24 hours

Shurflo potable water pumps are designed and constructed to deliver high performance, reliability and serviceability. These potable water self-priming pumps employ three independent pumping chambers to lift water up to 12 feet. They provide smooth flow and operate quietly. All Shurflo pumps have a built-in check valve that is rated to 200 PSI which prevents backflow into the tank, and contain an adjustable switch. This water pump can even run dry without damage! Comes wtih a 2 year limited warranty, and can be mounted in any position. UL, CSA and IAPMO apply to some models.

  • 12 VDC, 2.8 GPM, 45 PSI
  • Can support up to 3 fixtures
  • 4 Amps Open Flow
  • Can run dry wtihout damage
  • 2 Year Limited Warranty

New Myrate Progressive Boise Chiropractors Purchase

Sunday, November 27, 2011

Guidelines For Buying A Water Pump for Irrigation

!±8± Guidelines For Buying A Water Pump for Irrigation

If you own a farm or a huge garden, you most likely have a sprinkler system. A sprinkler system will keep your plants watered regularly thus; you no longer have to take out the garden hose and then water your plants. This can be every impractical especially if your farm or land covers a huge land area. In order for your sprinkler system to work you will need an irrigation water pump. This pump will draw water from various sources like ponds, rivers, lakes, and wells and then take it to the sprinkler system. This water will then be used for watering your plants.

However, there are certain points to remember before you buy a water pump for irrigation.

First, you must design your irrigation system first before you purchase the pump. First timers make the common mistake purchasing a pump first without designing the irrigation system only to find out that the pump does not fit. Do not fall prey for this, design and construct first before you shop for a water pump.

Second, off the shelf irrigation pumps often contain misleading labels. These labels can contain certain information that is either ambiguous or misleading. Understand that a label that says "20 GPM, 55 PSI" is different from "20 GPM at 55 PSI" and "20 GPM or 55 PSI". GPM stands for gallons per minute while PSI stands for pounds per square inch, which is a unit for pressure. Therefore, a "20 GPM at 55 PSI" label on the pump means that you get 20 gallons of water per minute if the pump exerts a pressure of 55 PSI.

Third, consider the classification. Irrigation pumps and high-pressure water pumps are two different classifications. This does not mean that the pumps classified under irrigation pumps can be used for sprinkler systems. Most sprinkler systems use pumps classified under high-pressure water pumps. On the other hand, irrigation pumps can only support a single small sprinkler head attached to a hose.

If you are having second thoughts, always consult an expert.


Guidelines For Buying A Water Pump for Irrigation

Bushnell Elite 4200 Rifle Scopes For Sale Suv Roof Racks Buy Lexmark P450 Decide Now

Thursday, November 24, 2011

Why You Don't Need Residential Reverse Osmosis Water Systems

!±8± Why You Don't Need Residential Reverse Osmosis Water Systems

What more can I say about residential reverse osmosis water systems? I can continue to write articles explaining to people that reverse osmosis systems residential owners are not happy with the results that they are getting. I simply want to convince everyone that home R.O. is not the answer.

The companies that manufacture them have touted residential reverse osmosis water systems as the end all to be all water purification systems. They are hardly purification systems; they merely de-mineralize our water. You will still receive the same dose of chemical and biological contaminants even with the use of an R.O. system.

Only reverse osmosis systems residential owners that live outside of the mainline area actually receive any benefit from its use. Those drawing their water from wells or open water sources find the system necessary in order to remove silt. Even then they need additional filtering to actually purify their drinking water.

If you live within the service area of a water treatment facility then residential reverse osmosis water systems are a waste of money. The treatment facility has already run the water through repeated R.O. cycles to remove silt and sand, so no further filtering of that nature is necessary.

Many reverse osmosis systems residential owners are finding out about the shortcomings of their chosen filters very quickly. The machines can be quite expensive at up to ,000 for a high quality system, and they run on electricity. You can expect your electric bill to take a big jump once this unit is in use.

The main problem is the residential reverse osmosis water systems complete inability to remove the chemical and biological contaminants that threaten our health every day. Even the R.O. units at the water treatment plant, which are far more sophisticated than any that you could purchase, cannot remove them.

The reverse osmosis systems residential owners use are extremely limited. All of the mineral composition has already been removed, so what is your system actually doing other than running your electric bill sky high? You are still in need of additional filtering, so if you haven't already bought one of these systems, then you should just forgo it.

There are far better methods of protection than residential reverse osmosis water systems. A home water purification system with a granulated activated carbon and multi block filter will remove all of the dangerous chemical contaminants that the R.O. system fails to remove.

If you want to rid your water of the biological health threat, then a unit that features a sub-micron filter is in order. Microscopic parasites and bacteria that were not removed by the chlorine disinfection process can come back to haunt a reverse osmosis systems residential owner, but can be effectively eliminated by sub-micron technology.

I truly hope that I have been able to convince you that residential reverse osmosis water systems are simply not the way to go if your goal is to drink and shower in clean, pure water. A home water purification system, whether point-of-use or whole house, is by far a better choice.


Why You Don't Need Residential Reverse Osmosis Water Systems

Top 10 Canon Mx300 Driver Panasonic Ae3000u Buy Online

Friday, November 18, 2011

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

!±8± Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

Brand : Wayne | Rate : | Price : $57.00
Post Date : Nov 18, 2011 03:17:07 | Usually ships in 1-2 business days


  • 1/2-horsepower submersible utility water pump can handle material up to 1/2-inch thick without clogging
  • Removes water within 1/8-inch of surface
  • Glass reinforced housing prevents rust
  • Connects to garden hose with 3/4-inch adjustable discharge adapter
  • 1-year limited warranty

More Specification..!!

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

Coconut Water Vita Coco Get It Now! Shop For Villaware Waffle Maker Lefty Acoustic Bass Save You Money!

Sunday, November 13, 2011

Permitting US Uranium Mines Takes Years

!±8± Permitting US Uranium Mines Takes Years

Few investors and analysts have a firm grasp of the length of time environmental studies and the approvals process requires. Having visited numerous investor forums, we realized many investors believe a property is drilled and then mined, after a brief permitting period. Quite the opposite is true, as explained to us by Richard Blubaugh, environmental manager for Powertech Uranium (PWURF). A highly respected environmental manager, Mr. Blubaugh got his start in government service before moving to private industry. We found the same governmental background with others of Mr. Blubaugh's caliber, such as Strathmore Minerals' Juan Velasquez and Uranerz Energy's Glenn Catchpole.

Permitting a uranium mine requires more than a simple application to mine. And, as we discovered, the process can take between three and six years (sometimes even longer), costing several million dollars and requiring numerous scientific studies on a company's property. This could add additional pressure to uranium prices.

StockInterview: After studying several company news releases, it appears one of the first environmental studies required is the archaeological survey. Why is that done before mining uranium?

Richard Blubaugh: The archaeological surveys are required to evaluate cultural, archaeological and paleontological resources. It's necessary to do to in order to identify and protect those resources for the whole state--academia as well. You can't really go out and disturb these areas without knowing what's there, what might be valuable and what might not. The first thing is to identify a reputable and competent archaeologist or a group of archaeological professionals that have some standing with the regulatory community.

StockInterview: What does the consulting group do then?

Richard Blubaugh: They start with literature review, which would go through the records and see if any previous studies have been done in this area. Those studies are archived generally with the state archaeologists or historical preservation society. Then they determine best where to start and, in this case, we are asking them to start where our drill sites are located because we want to clear those sites so that we can go ahead and start our drilling activities. Then they will review the rest of the property. It could take anywhere from months to years depending upon what's found in any given area.

StockInterview: What happens if you find something of historical interest?

Richard Blubaugh: If you find something, this doesn't mean you are out of luck or your project is stopped. It just means that it's going to take a little more time and effort to deal. It usually is a negotiated process under the Federal actions, a Section 106 consultation. If it's determined to be eligible, then it requires more research and negotiation, which is often avoidance. You fence it off or somehow mark it and stay away from it. But if you have to disturb an area where there's a cultural asset, then that requires mitigation through digging, identifying, recording, photographing and reporting on everything that's found. Then, that stuff is often removed and archived in a museum.

StockInterview: What do the archaeological consultants look for when going over your ground?

Richard Blubaugh: Items such as dinosaur bones or old stone tools and baskets, and historical resources, which are within the last few hundred years, since the white man has been on the continent. You could have buildings, an old school building or some other structure that had some significance, which maybe is a hundred or more years old.

StockInterview: How does your initial review for PowerTech in South Dakota look with regards to this part of the environmental studies?

Richard Blubaugh: We are fortunate at our Dewey Burdock project in South Dakota. Previous parties involved with the site, TVA and Silver King mines, had already done a lot of archaeological work on the site. Because the data is more than 20 years old, we have to go out and confirm they didn't miss anything on the earlier surveys. I talked to the state archaeology office last week. Indications are that there isn't anything that's eligible at the project site. But there are a number of artifacts, mostly in the nature of stone flakes, points, arrowheads and that kind of thing.

StockInterview: What are some of the other environmental studies which need to be done?

Richard Blubaugh: There are a dozen or more specialized disciplines that have to be studied, such as meteorology, archaeology, paleontology, seismology, vegetation, wildlife and soils. You look at all aspects of the environment that could possibly be impacted by your operations or that could impact your operations.

StockInterview: Why are you doing a meteorology study when mining for uranium?

Richard Blubaugh: So that you know which way the wind blows. It takes often a whole year's worth of data to determine with accuracy which is the predominant wind direction. The data exists at weather stations around the country, at Federal installations, at cities, and so forth but the focus and, I guess the key phrase is, site specificity. Along with meteorology is air quality. We also take samples of the air and send the filters in for analysis so we know what kind of contaminants exist in the air before we start operations. It's information that you need to determine who is most likely to be contaminated if, for example, you had some type of accident. The data we collect gets inputted into computer programs for the NRC.

StockInterview: What other type of data are you required to assess?

Richard Blubaugh: You have to determine whether there are other economic resources in the area and whether you are going to be impacting their potential recovery as well, such oil and gas, or sand and gravel. If you have wetlands or surface water then you are going to have to also examine those critters. Typically you look at fish but you can also look at reptiles, frogs and so on.

StockInterview: And of course the water testing?

Richard Blubaugh:
We have two pump tests included in our exploration plan. The pump tests are going to be up front. That's going to be the first thing we do relative to groundwater, particularly for the Dewey project. We will probably be starting baseline groundwater monitoring at the Centennial project by June. I expect it will be pretty close to that for Dewey Burdock as well. In surface water hydrology and water quality, we also have to test so if we had any running streams in the project or near the project area, you have to do your sub-baseline on those surface waters as well, determine the water quality and the water quantity also.

StockInterview: What do the water studies determine?

Richard Blubaugh: Environmentally it tells you, kind of like the meteorology, which way the water flows, what kind of water it is, quality-wise, and what's in the water. It also provides certain data for production, such permeability, transitivity, porosity and those kinds of things. Transitivity has to do with how fast the water moves in the ground and the speed of water in the ground, i.e. so many feet per year.

StockInterview: What do you learn by doing some of these other studies, and why are they required?

Richard Blubaugh: We have to identify each soil type and map it. We have to be able to represent which soils need to be enhanced or not during reclamation. Actually, it's quite an extensive project for soils and certainly the radiometrics are part of it. With vegetation you look at productivity - how much biomass you get off of a given area and also plant cover; what percentage of the underground is covered by plant materials and growing plants. You determine the different species. The wildlife is very similar to that. You have to get into each species. Each one has different habitats and on somebody's list somewhere.

StockInterview: Why would you do a seismic study?

Richard Blubaugh: That deals with earthquakes and the degree of the probability of any particular size earthquake in the region. This goes into your design factors for structures, impoundments and so on.

StockInterview: And the 'bugs and bunnies' survey?

Richard Blubaugh: Yes, I'm glad you mentioned that. That's typically what we refer to those studies as, but it's a lot more than bugs and bunnies. We don't study the insects. That's kind of a misnomer when we say bugs and bunnies. In our wildlife surveys, that's the threatened and endangered species and habitats-- from birds to bears. Flora and fauna, this covers vegetation and wildlife under one term.

StockInterview: How long does it take to complete these studies?

Richard Blubaugh: Typically, baseline data collection--that's kind of the generic umbrella name for all of these different disciplines that you've got going on studying the project area and the surrounding environs. Your baseline data collection period typically runs a year to a year and a quarter. In some cases, it can vary depending upon the state or the key agency but generally, you look at a year so by the time you take the data, massage it, put it into your software programs, get the results and prepare your applications to the different agencies involved. You are looking at roughly a year and a half to two years on the outside for submitting your applications. The next step would be how long would it take to get the permit after you submit it and get all this information in your applications. That is a little more variable and, again, it depends upon the agencies and who is involved in it whether you've got the Federal agencies like NRC, EPA (which typically you are going to have EPA anyway), whether you are have BLM involved or the forest services. These are all contributing factors on how long it's going to take.

StockInterview: What is the general procedure: how much paperwork is involved, and who reviews it?

Richard Blubaugh:
It will be several volumes by the time you are through. You could be looking at anywhere from four to six of those 3-inch binders. It would all go to the NRC and the state agency. You wouldn't send all of that to the EPA. They are just focused on the groundwater so you pull all the groundwater stuff, and they may have some additional requirements that go to EPA.

StockInterview: And what if the accumulated data is incomplete?

Richard Blubaugh:
All agencies have what they call their completeness review so when an application comes in, the first thing they do is do a completeness review and make sure that everything that's required is in the package, in the application. That's before they even look at any of the content. They simply look to see that all the pieces are there. Then, NRC has indicated they are going to take a closer look during the completeness review, which they said could last up to 90 days. But it's more than a completeness review. It's a completeness and adequacy review, which means that at the end of that period, if your application is complete and adequate, then they are going to continue to review the application for licensing. If it isn't complete, then what they are going to do is return it to you. They are going to be a little more explicit in why it isn't complete and where the inadequacies are which will give you a good idea of what else you need to do. At that point then, they go into the EIS (Environmental Impact Study) process. The EIS process has been noted to take anywhere from 18 to 24 months, and longer if you have strong opposition.

StockInterview: How much does the environmental permitting process cost?

Richard Blubaugh: It does cost a small fortune. The costs are going to vary again depending on the project, area and whether or not an EIS is required, all those different factors will come into play. (Editor's Note: We checked with Strathmore Minerals' John DeJoia and Uranerz Energy's Glenn Catchpole, both of whom confirmed that environmental studies would likely cost in the neighborhood of about /pound of uranium mined on a company's project.)

StockInterview: Let's take Powertech as an example. How long would this process take your company to complete so you could mine at Dewey Burdock (South Dakota) or Centennial (Colorado)?

Richard Blubaugh: We are looking at South Dakota where we have NRC. When we are talking about the NRC and EIS process, 2010 or 2011 is what you are probably looking at there. But, for Colorado, in our case, we already have our schedule in place and our consultants selected and we are going to see. But, this is without a mill. We are looking at conventional mining on one of our deposits - open pit - before 2010.

StockInterview: Where would the ore get milled? And would you have it trucked to a mill?

Richard Blubaugh: We've been talking to Sweetwater. It would work just like it would for any other trucking facility, except we would have to get a hazardous transportation permit from DOT (Department of Transportation). Then there's rail. We have rail close to both our facilities in our planned operations in South Dakota and in Colorado.

StockInterview: How do you avoid dealing with a federal agency?

Richard Blubaugh: The agreement states - Texas, Utah, and Colorado - don't have the EIS requirement. They may have requirements that are almost similar to an EIS requirement, but some of them don't. If you are going to build a new processing facility, then yes there will be an EIS. But if you are just going to build a satellite facility, or if you are going to build an open pit mine or underground mine to conventional mining facilities, you do not require an EIS.

StockInterview: And in South Dakota?

Richard Blubaugh: Because South Dakota is not an agreement state, we will be working with the two larger Federal agencies as well: the Nuclear Regulatory Commission (NRC) and the EPA. EPA issues the approvals for the UIC program which is basically governing injection wells and the aquifer exemption process. NRC issues the source material and byproduct license. Anything having to do with uranium processing goes to NRC.

COPYRIGHT© 2007 by StockInterview, Inc. ALL RIGHTS RESERVED.


Permitting US Uranium Mines Takes Years

Chaise Lounges Cheap Free Shipping Brand New Coffee Machine Delonghi


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links